Cisco CCNA, CCENT, and CCNP Practice Questions: Static Default Routes, Wildcard Masks, And More!

Let's tesr your knowledge of important Ciscointo OSPF.
certification exam topics such as static default routes,CCNP Certification / BCMSN Exam:
access lists, and more!A Cisco switchport is configured with Root Guard. A
CCENT Certification:superior BPDU is received on that port. What will
What command will create a default static route withhappen?
a next-hop IP address of 30.1.1.1?A. Nothing.
Answer: ip route 0.0.0.0 0.0.0.0 30.1.1.1B. The port goes into root-inconsistent state.
We could also specify the local exit interface at theC. The port goes into err-disabled state.
end of that command.D. The port goes into blocking state.
CCNA Certification:Answer: B. When a superior BPDU is received on a
In a Cisco ACL, what can be replaced with the wordport protected with Root Guard, the port will be placed
"any"?into root-inconsistent state. This will prevent a switch
A. A subnet mask of 255.255.255.255.found off that port from becoming the root bridge.
B. A subnet mask of 0.0.0.0.CCNP Certification / ISCW Exam:
C. A wildcard mask of 255.255.255.255.Short answer: What IP protocol number does ESP
D. A wildcard mask of 0.0.0.0.use?
Answer: C.Answer: ESP uses IP protocol number 50.
CCNP Certification / BSCI Exam:CCNP Certification / ONT Exam:
The command summary-address is designed for useWhich of the following phrases does NOT apply to
on what OSPF router type(s)?WPA2?
A. ASBRsA. dynamically generated keys
B. ABRsB. encryption
C. Backbone routersC. intrusion detection
D. Total stub routersD. one-way authentication
E. Stub routersAnswer: D. WPA2 uses mutual authentication, not
Answer: A. The command "summary-address" isone-way authentication.
designed for use only on an ASBR. This command isLook for more free Cisco certification exam training
used to summarize routes that are being redistributedquestions on this same website!